The Tardis

Here's a the first of two mats heading down under for Ben and Yoko Bennink. For those who unaware, Ben and Yoko run the slideaholics.com site and live around Lennox. I built a pair of mats for them many years ago and since then they have been looking to extend the quiver so I was stoked to see them get in on the current run.

This mat has been built for Ben and is a 200/70 RB-JMC Free-Breather with free elastic rocker. Ben is a really big fella, nicknamed 'Bear'. He referred to himself as a hunk when I asked for his body type [NB this may be a slight distortion of what he actually said].

I still had the scaling down from the last mat which Ben said was a good fit so we went with that.

Ben's last ride was a Rubber Bucky and we both felt that the slight down-scaling and different corner templates between this and the RB-JMC would be the right step.

Ben has gone for a deck valve as he and Yoko enjoy running each other over. You will also notice the sparce front corner grip which is designed to offer something to grab but leaving clear nylon for sleeveless arm paddling.

On to the name, Ben has named his mat "The Tardis" because "it's blue and can take me where I want to go, fast!"

Lovely stuff!

The Tardis and Yoko's mat are both heading off with the courier so we'll see how long that takes with the Christmas hecticness. I'll do a post about Yoko's mat dreckly, but for now, have fun Ben!

Cheers

G

Ellie 2

Here is"Ellie 2", a G-Mat Nouveau Racer built for Aussie matsurfer, Peter Abbott.

I agreed to squeeze Pete in for a mat a while back after his first mat from me, Ellie, fell victim to the seemingly increasing peril of talentless loggers getting in the way and either going belly up right in front of someone riding (if you're caught inside paddle for the wash and take what's coming to you) or letting riderless lumps plow through the line up because they "don't need a leash"!

Sorry for the rant but take responsibility for yourselves you f*cknubbins!

[exhale]

So... Onto Ellie 2. She's a 200/70 wheezer built to feel like a trustworthy r stable ide on critical waves. Pete surfs some bigger hollow surf and has found that the Nouveau Racer design fitted this perfectly. He was keen to go with a red deck again. The material I have now is different to the stuff I had before with this red being a deeper kind of cherry colour. It really is very nice. The original Ellie had a black bottom skin but having chatted with Pete we agreed on navy. It's much a little more malleable (a more apt word than "flex" which I've seen a bit lately) and therefore faster.

Other than that we haven't changed a thing.

Ellie 2 is en route right now and Pete has some travel planned so I'm looking forward to hearing about Ellie 2's adventures!

Have fun Pete fun Pete and watch out for the kooks!

Cheers

G

Yin Yang Glider

Say hello to "Yin Yang Glider", a custom G-Mat Ute built for Aussie mat surfer Richard Sandilands.

Richard lives around Byron in NSW and over the years had shared several sessions hidden from the hoards in the less crowded corners. This is where he first saw GG riding a mat. Like many of us Richard bought a mat, got hooked and then suddenly realised that he hadn't ridden a board in ages!

Richard says:

“There was a small coterie of other mat surfers that gathered at Wategos most mornings in George’s orbit, a loose entourage of older eccentric guys, refugees from the more crowded Byron breaks. Sometimes Warren [Pfeiffer] would come up from Yamba and it was always fun to share the waves with him too.

And the year Jamie [McClellan] was living up the coast and would come to Byron to surf from time to time.”

— Richard Sandilands

There is a strong crew of good mat surfers around that way on the better breaks too so I always like sending a mat that way.

So on to Yin Yang Glider. This mat is a 200/70 Ute. Richard was interested in a stable and versatile mat so she is built as a wheezer which can be useful in choppy conditions and also on bigger days.

Richard says:

“I have chosen what I believe to be a versatile and durable set of specs for this mat, leaning on the more conservative side perhaps to allow for a mat that will surf in a variety of conditions here including bumpier surf especially on cross-shore days at the Pass that can confound the longboard riders and create opportunities for mat riders in what would otherwise be impossibly crowded and competitive conditions.”

— Richard Sandilands

The name came to mind for Richard based on the colour. I really do love monochrome mats. Seriously.... I proper love 'em and Yin Yang Glider is the first in a run of three of them. 🖤🤍

So Yin Yang Glider had embarked on her journey down under. I'm excited to hear how this adventure pans out.

Have fun Richard!

Cheers

G

Cliodnha

Meet Cliodhna, a mat for the final of the three very local people in this run.

Mags Harding (mother of Joe Harding whom a good number of readers will know) lives pretty close to me and is a regular long-standing fixture at the local South Devon surf spots. Mags has ridden mats a bit in the past but these have usually been too big for her (most recently borrowing a XL G-Mat 5 Star General from Alex Williams  which is basically a camp bed for Mags!)

We talked about what Mags was after and she said she wanted an all rounder that would work well in surf around 2-3ft having mulled over the options we settled on a G-Mat Ute as this will cover everything and comfortably accommodate bigger surf as Mags develops her mat riding.

We went for a 200/70 build with a pink acid dyed deck and navy bottom. Mags asked for grey grip and I was wondering how it would look with the pink... Great is eanswer!

Internally we have restricted the airflow. "Wheezers" retain their shape well offering stability, along with the 200d deck, so offers Mags the opportunity to get by the inflation down.

As for the name, Mags tells me that in Cork Cliodhna is known as the Goddess of love and beauty.. She was also a Queen of the Banshees in Irish folklore and seems a perfect name for a mat that will be screaming down the line!

We said we really must have a South Devon matmeet so putting the call out to any mat surfers hiding out there!

Have fun Mags! It's been a fun build and I'm looking forward to seeing you out there!

Cheers

G

Sandpiper

Say hello to G-Mat 270 (AKA "Sandpiper"), a 200/70 Ute built for Sam Arkinstall.

Sam is a UK based surfer who is fairly new to mats but he is friends with Ethan Greenwood who has been riding mats for a few years now so it was only a matter of time.

Sam came with a clear colour scheme in mind for his mat so I had to crack out the dye. Lighter colours like those towards the tail can often be a bit fickle but I think we've got away with it!

I asked Sam about his journey into mats. He said:

“My journey in to mats started with my friend Ethan who introduced me to it. I had never seen or heard about it before. I was definitely sceptical about it at first , then when I used a mat for the first time the feeling of riding a wave was very different to any form of surfing I have done before!

It’s nice for me because I can add another Watersport to my quiver as already windsurf, surf, paddleboard, sail and wakeboard. I like to think I am an all round waterman, so I have a water sport for near enough every weather condition.

My go to places are usually Crooklets or Widemouth but recently moved to North Devon so been exploring some spots round there.

There’s not much meaning behind the name really. basically went on a long google search around Monterey bay as that’s where the colour scheme derives from, and found there was a movie called Sandpiper filmed there and though it sounded cool.”

— Sam Arkinstall

I was stoked to build a mat named Sandpiper myself as it was my Dad's CB Radio handle when I was a kid!

So back to this Sandpiper, as I say we have gone with a 200/70 free-breather. This offers stability in the deck so the mat maintains it's shape more readily which will be useful for Sam as he develops as a mat rider whilst maintaining the ability to morph responsively to the wave and rider input. Sam has gone for a free elastic rocker for versatility.

Have fun Sam. I hope we get to share some waves one day.

Cheers

G

Mimosa

This is Mimosa, a mat built for Welshman Huw Beynon. Huw has been a mat surfer for some time and has been riding a stock G-Mat and pretty well at that. Living on the Gower in South Wales, Huw has some great mat waves on hand so when he got his deposit in for a custom mat I was over the moon!

Mimosa is definitely a step up from Huw's current ride being a 70/70 super-free-breather so much more sensitive and responsive than the 200/70 wheezer RFT that he currently rides. We discussed elastic rocker options and Huw opted for free rocker, given the wide range of conditions he will be surfing. With some very peaky waves in the mix, Huw felt a mat that would respond to hard cutbacks was handy whilst flattening nicely for the points. The bungee has also been added to cover nipping over the Severn to jump in the wave pool.

Huw has also gone for pigmented grip and logo. They say blue and green should never be seen. Well... I beg to differ.

The only downside is my spelling of Beynon! Sorry Huw... As a fellow Celt I feel suitably ashamed. Huw seemed to find my balls up funny though so all's well that ends well.

I'm going to get to surf with Huw and Mimosa in April at The Wave on Bristol. Can't wait to see them in action!

Cheers

G

Circe - Heading to Noosa

This is the first of two mats going to Australia for a matting couple in Noosa. "Circe", a 200/70 Ute built for Rachel Scarff. Rachel says she has named her mat "Circe" beacause:

“I’ve always loved mythology, in particular Circe, and always find myself coming back to her. Thought it would suit as her legend is based around water. Her dad is the sun god and mother is a sea nymph. She also represents femininity in the stories about her in a way that’s scares men, so thought it would be funny to have a mat called that in a sport that’s fairly dominated by guys who don’t always give women respect or the time out in the ocean. It’s like if they were mean I’d just channel Circe (she’s a goddess of sorcery) and put a spell on them and turn them into a sea cucumber or something 😂😂”

— Rachel Scraiff

Notice the mistake here?

That is perfect!!! I always love building mats for women. Unlike much of the mainstream surf media, mat surfing tends to break down the gender barriers and just welcomes mat surfers as mat surfers and we really do need more women to be surfing mats.

I asked Rachel about her matting experiences the journey into mat riding. She said:

““I’ve been living in Noosa for the last 7 years, originally from South Australia. Started out on a log, but downsized to an 8’2 V bottom made by local board shaper Ado (Maren surfboards), because I just want to trim and turn. I’m fairly new to the mat game. I started using my partners spare mat more seriously last year and have been enjoying it so much that I decided to get myself a custom mat for my size (I am very short haha!). My partner has been wanting to order a g-mat for a while now, so perfect timing!

I’ve found myself hardly surfing my board these days and only taking out the mat because I just love it so much - I can go out and even if I only get a few waves I have a blast, as opposed to taking the board out and not getting that same feeling.

Love riding the mat out at Tea Tree and always fun to mat with pals James T, Matt C and my partner Ben. Still a few other mat friends that I’m wanting to catch waves with….””

— Rachel Scraiff

That's such a familiar story. Mats get you like that!

So then, on to the tech bits. Circe is a 200/70 wheezer with free elastic rocker. Rachel has also gone with a Hestered valve. As with all customs this has been specifically scaled to meet Rachel's body size so will hopefully feel like a good fit.

Circe is on the way to Oz now along with her partner Ben's mat... but that's a story for another day.

Have fun Rachel! It's been a pleasure.

Cheers

G